17th Oct2013

Reader’s Ride: Randy Reed’s v7 WRX STi

by Michael Chandler

Randy Reed v7 WRX-4

We’ve known for years that the home markets for certain manufacturers have been getting far cooler things than we get here in the land of freedom and bald eagles and deep fried bacon.  But what if you, between pieces of said bacon, decided you wanted one of those not available rides?  For a while, you did nothing but deep fry more bacon and be content with what you had.  Randy Reed of Greensboro, NC did not do that.  He wanted a bug-eye STi, so he made one.

Randy Reed v7 WRX-1

He slapped a JDM v7 front end on, and a front lip as well.  The headlights were upgraded with a Morimoto projector HID kit, so as to see better.  ChargeSpeed air ducts replaced the fog lights and a pair of carbon fiber STi side markers were popped in.  The 4.5″ carbon fiber hood scoop brings in much more air and the occasional bird.  Out back a wingless trunk from a 2.5RS was painted matte black, fitted with a STi badge, then installed.  Keeping flying debris in check are a set of Rally Armor mudflaps.

Ahead of those mudflaps are a set of 18×10 Rota SVNs wrapped in Nexen rubber.  Well, most of the time they’re there.  With winter approaching Randy picked up a set of Enkei Evo 6s.  Yes, they have winter in North Carolina.  Yeah, I was surprised too!

The suspension and brakes on this bug-eye are pretty straightforward: ISC N1 coilovers with camber plates and STi brakes and hubs.

Randy Reed v7 WRX-3

Inside is pretty simple as well.  Full USDM STi interior, JDM floor mats, SPT boost gauge and a Blitz turbo timer.  He sticker bombed the dash insert around the stereo, and he chucked the OEM head unit for a pop out unit with a 7″ screen.  When he’s not changing radio stations, he’s changing gears via the short throw shifter toped by a Blox neochrome shift knob.

Randy Reed v7 WRX-2

And now on to the good stuff!  Here is the V7 STi motor, sitting comfortably in it’s natural habitat.  For those unfamiliar, it’s a 2 liter motor with forged internals from the factory and a bigger turbo.  In this case it’s a VF30 to go with the bigger top mount intercooler.  Getting fuel to this home market masterpiece are a set of 750cc injectors.  Getting the exhaust gasses away from the motor are a 4″ bellmouth down pipe feeding into a DC Sports exhaust.  Sitting almost out of sight is a Grimmspeed 3 port boost solenoid.  The car received an open source tune via a Tactrix setup and put down a very healthy 307whp and 300lb/ft.

Making that power useful is the drivetrain, which received its fair share of upgrades.  A USDM six speed transmission pulled from a 2005 STi was fitted with the two liter starter and works like a dream.  A Clutch Masters stage 2 competition clutch and an Exedy lightweight flywheel were thrown into the mix for added driving pleasure.  Because a transmission swap in a Subaru isn’t as straightforward as it seems, the axles have been swapped out for a set from The Driveshaft Shop and a R-180 rear end had to be installed as well.

Randy Reed’s STi sits as a testament to what a motivated man can do when he wants something you can’t just run out and buy.

Want to see your car on here?  Send us some decent photos and a list of the modifications and we’ll get something going!

Words by Michael Chandler, Photos by Randy Reed.

*Article and Photos are copyright of CAMAutoMag.Com and their respective owners.