17th Nov2014

Welcome To The Internet: Datsun 280ZX

by Michael Chandler

Datsun 280ZX Feature CAMautoMag.com Michael Chandler-1

 

Words and photos by Michael Chandler

Ahh the internet, home of all things wonderful, weird, horrifying and amazing.  It’s also where Ian Perri’s 280ZX has found recognition, and dare I say fame.  We first met Ian and his shakotan S130 last year at the In N Out Subie Invasion meet.  The car was a lot like it sits before you, but it’s also undergone some changes.  Changes we’ve been able to see through Facebook and Instagram posts.

Datsun 280ZX Feature CAMautoMag.com Michael Chandler-3

It’s also on Facebook and Instagram that we stumbled across other things that Ian likes.  He’s a big Nicolas Cage fan, and also enjoys King Of The Hill.  He runs around with the Slamburglars and Outsid3rs guys, and he got his hands on a Toyota Cressida.  He leads a well rounded life, or so says the internet.  Enough about him, let’s talk about the S130.

Datsun 280ZX Feature CAMautoMag.com Michael Chandler-8

First thing you notice about the car is how you almost trip over it.  (Well, that and what’s left of the Kaminari body kit)  This thing is insanely low.  On the drive over to the shoot we saw it shooting sparks while driving over a flat road!  The stance is achieved with custom coilovers with sectioned struts up front and S13 240sx coilovers in the rear with shortened struts.

Datsun 280ZX Feature CAMautoMag.com Michael Chandler-2

Ian drifts this car.  Not “occasionally spin donuts in a parking lot” drifting, he goes out to Vegas ProAM events, pays his entry fee and gets loose.  He even drove this car, as it sits, to California to drift.  To help with that, drifting not driving to California, he’s modified the steering knuckles and inner tie rods.  Tein tension rods for an S13 have been adapted for use as front lower control arms, and they’ve also been clearanced to clear the steering knuckles.  While he was in there, he added some negative camber roll center adjusters.

Datsun 280ZX Feature CAMautoMag.com Michael Chandler-9

There are no sway bars at either end, this S130 is a sway bar free zone.  There is 5-6 degrees of camber correction in the rear using heim ends in the rear lower control arms, and a slotted rear crossmember.  Between the rear wheels is a differential out of an S12 200SX.  The R180 diff has a 4.11 gear and the carrier has been swapped to accept stock axles.  It’s also been welded.

Datsun 280ZX Feature CAMautoMag.com Michael Chandler-5 Datsun 280ZX Feature CAMautoMag.com Michael Chandler-6

While we’re at the back, let’s check out the JDM 280ZX-R hatch and spoiler.  That’s some sweet, sweet JDM goodness.  There’s also the twin tail pipes sticking out from the bumper.  Those are the end of a custom exhaust featuring MSA twice pipe muffler.

Datsun 280ZX Feature CAMautoMag.com Michael Chandler-12 Datsun 280ZX Feature CAMautoMag.com Michael Chandler-14

That exhaust starts here, under the hood.  It come off of a MSA header that’s been modified for better ground clearance.  The header hangs off of the L28, which is topped off with a shaved and polished valve cover.  Bringing the spark to the party is an MSD Ignition, and keeping everything cool is a Koyo radiator with the OEM shroud modified to fit the new radiator.  The big things here are the triple 45mm OER carburetors.  And the custom fuel rail with AN fittings, but mostly the carbs.  Carburetors are black magic and voodoo to get working right, getting three to work right AND together means Ian is some kind of wizard.  Backing the magical OHC mill is a transmission out of a kouki 280ZX.

Datsun 280ZX Feature CAMautoMag.com Michael Chandler-15 Datsun 280ZX Feature CAMautoMag.com Michael Chandler-16 Datsun 280ZX Feature CAMautoMag.com Michael Chandler-17

The interior is a show quality, concourse perfect… No, no it isn’t  It’s a well worn interior, one you’d expect in a car built and used like this.  A Sparco Sprint bucket seat is showing it’s age, but still holds Ian securely in place.  The red button on the Nardi Gara wheel doesn’t do anything except honk the horn.  And the shifter is something I know very well.  It’s out of an old Celica Supra, which is the same place the shifter in my Supra came from.

Datsun 280ZX Feature CAMautoMag.com Michael Chandler-10 Datsun 280ZX Feature CAMautoMag.com Michael Chandler-4

When we were first introduced to this car it was on a set of Centerlines.  He still has those, and a set of Enkei 92s, but the red slippers this thing wears will make any fanboi jealous.  Starting life as 14×6 all around, the Advan A3As have been widened by Wheelflip.  The custom made lips have been polished and bring the specs to 14×9.5 -35 in the front and 14×10 -41 in the rear.  The barrels and faces were refinished by Ian himself, and he took it upon himself to reassemble the wheels.

The internet loves this car.  Maybe because it stands in contrast to the uber-clean, yet hardly driven Stance and “race” cars we see.  Perhaps deep down inside we all want a shakotan car.  Or maybe because it’s a really honest example of something built by a guy who wants to build something for himself to go do stupid things with his friends in.  Whatever the reason, it’s getting some of that sweet internet fame.  Sweet, delicious internet fame it deserves

*Article and Photos are copyright of CAMautoMag.Com and their respective owners.

 

30th Oct2014

2 + 2 = 260: A Rare S30 Variant Gets The Spotlight

by Michael Chandler

Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-1

 

Words and photos by Michael Chandler

The S30 chassis Datsuns are some of the most gorgeous cars to ever be shipped off of the islands of Japan.  The curves and swoops of the coupes will forever remain a pinnacle of automotive design.  But something you might not know is that all S30s aren’t coupes.  Between 1974 and 1978  they built 2+2’s: longer 260zs (163 inch length and 90.6 in wheel base for the coupes vs. 175 and 102.5 for the 2+2s) with room for two more passengers!

Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-8

And they’re rare too, while Nissan built them between 1974 and 1978, they were only available in the US as 1974 models.  Of the 49,671 260Zs sent to America, only 9,499 were the 2+2 variant.  And only one of those 9.499 belong to one Mr. Taigon J. Rider.

Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-12 Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-13

The 260Zs had larger engines than the previous 240Z, but didn’t make that much more power due to restrictive emissions equipment and retarded timing.  So Taigon stripped all of those pesky emissions things off of the L26, and set the timing to an appropriate mark.  While he was stripping things, he was also adding things: like an entirely straight piped exhaust and a wrapped header.  On the other side, the intake side, he traded up to a pair of SU Roundtop carburetors topped off by MSA air trumpets.   He also addressed the forty year old ignition system.  He installed a Crane Cams Fireball XR700 electronic ignition, along with an MSD Blaster 2 ignition coil and a sextet of NGK spark plugs.  Most of the afore mentioned modifications aren’t visible unless the hood is up, but one thing is: the Hayden Cooling Systems oil cooler.  That oil cooler is a convenient segue to the exterior of the car.

Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-2 Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-5Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-7

Which is utterly striking.  The deep, rich blue paint accentuates the curves inherent to all of the S30s.  The blue is contrasted by the white custom front grille and Roberk fender mirrors.  Below the grill is a Xenon urethane air dam to accentuate the car’s strong jaw line.  And the flares!  The massive MSA flares on each fender not only add to the aura of the Datsun, but are also necessary.  Underneath them sit massive 15×10 -40 American Racing Eagle Alloy 028 wheels, with 195/60 Falken Ziex ZE612 tires stretched over their massive width.

Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-17 Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-16

Inside the different cabin are a pair of racing seats: a Corbeau TRS seat for the passenger and a mystery seat for Taigon.  No matter the seat, the occupant is held securely in place by Takata harnesses.  The driver grips a MOMO Competition steering wheel for most things, and a OEM “Z” shift knob to change gears.

Datsun 260Z 2+2 feature CAMautoMag Michael Chandler-9

A rare variant of a classic chassis has been turned into something more unique, by a man with a unique name and Instagram handle: @taigonrider

*Article and Photos are copyright of CAMAutoMag.Com and their respective owners.