10th Jun2015

The People’s Champ: Scion FRS

by Michael Chandler
Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-9
Words and photos by Michael Chandler

This matte metallic blue Scion FRS has a small pedigree.  Well, not really small: it won the Favorite Scion award at the last import Spring Showoff meet which is impressive considering how prolific the FRS has become.  If you hadn’t seen the car before then, it’s ok.  I had only seen it once before the show.  Seemingly out of nowhere, we have a new champion of the people.

Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-2

JJ, the fella who owns this, bought it new in May of 2013 with all of 11 miles on the odometer.  Like any good, sensible person, he began modifying it.  Like most people, he decided it needed more power.  The usual power adders were thrown on,  but naturally aspirated just wasn’t cutting it.  He needed more.  He needed a turbo.

Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-13 Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-14

 

And that’s exactly what he got!  The Borg Warner 6258 EFR turbocharger came in a kit from Treadstone Performance, which also included an intercooler, hot and cold pipes, the exhaust manifold and up pipe (both of which he had ceramic coated), and a 265lph in tank fuel pump.  Because you can’t just cram additional air into the engine without adding more fuel, JJ threw in a set of 770cc Deatschwerks fuel injectors.  He also grabbed a billet diverter valve from Treadstone, to relieve excess boost pressure.  Additional cooling, specifically for the oil, is provided by a Mishimoto oil cooler.  The whole affair is run by an EcuTek reflashed ECU, which had the wick turned up by Jesse at FNP.  The kit was installed, and all the maintenance is done at Paradise Performance by JD Youngblood and Matt En.

Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-18

When you add over 100 horsepower to any car, you should probably address the clutch.  JJ wisely did so, and had JD and Matt throw in a stage 3 segmented ceramic clutch from Competition Clutch.

Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-19

Rounding out the power and usability adders, and providing a nice segue to start talking about the other aspects of the car, is a 3″ straight piped exhaust from Simple Performance.  As you can see, the exhaust sticks out a bit.  Not an insane amount, but enough to be noticeable.  And it’s also got a bit of carbon fiber wrap on it.  An odd place for carbon fiber, but it’s not the only carbon fiber on the car.

Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-10

The side skirt extensions are carbon fiber, and they’re custom.

Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-1

As is the Metallic Blue wrap.  JJ dropped the car off at Justin’s Tint, where the man himself wrapped the car.  The freshly wrapped Scion was taken to Luxe Auto Spa where it was coated with CQuartz FINEST ceramic surface protection, and also had the brake calipers color matched to the wheels and the hats and hubs blacked out.

Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-11 Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-12

 

Before the wrap, JJ had a ChargeSpeed front lip and rear spats installed.  Not as loud as the Rocket Bunny kits, the ChargeSpeed pieces accent the car without becoming the focus of the car.

Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-4

The 18×9.5 Enkei RS05RR wheels also provide a nice, yet not overly distracting touch to the car.  Wrapped in 265/30 BF Goodrich Comp 2 tires, they fill the wheel wells nicely.  The TEIN Monoflex coilovers reduce the wheel gap, while also being great coilovers that make an already stellar handling car handle better.

Turbo Scion FRS People's Champ CAMautoMag Michael Chandler-8

JJ has more plans for the car, the most visible is a big APR spoiler that will match the curve of the rear of the car.  Until then, we’ll have to be content with the car that the voting public loves

*Article and Photos are copyright of CAMautoMag.Com and their respective owners.
26th Jan2015

Old Man Yellow

by Michael Chandler

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-6

In this era of instant gratification, where some measure their worth in the amounts of likes, shares, favorites and retweets, taking time and doing things right is lost.  A lot of people’s “builds” are nothing more than installing coilovers or airbags, and new wheels.  It seems that people have forgotten that the more time you put into something the better it can be.  This 1967 Chevrolet Chevelle 300 two door post sedan received a frame off restoration, something that takes year to accomplish in its own right.  Daniel Chillinski, the owner, has taken ten years to bring the car to this point.  It was worth the time.

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-20

Daniel bought this car when he was 18, from the original owner.  A little old lady who only drove it to church on Sundays, and to the store once a week.  Or something like that, because the math says the Chevelle did less than 5000 miles per year in its forty-seven year life span.  The car was still packing the 230 cubic inch straight six engine, and three speed transmission with a column shifter.  Most of the original things have changed about this car, except the color.  According to Daniel “the color was going to be much more radical burnt orange, and gunmetal grey but after so many years I couldn’t part with the original Butternut yellow.”  That Butternut yellow was dubbed “Old Man Yellow” by a friend of his who was in town, on leave from the Navy, was refreshed by Nocturnal Performance.  They also threw the color on the custom hood that’s sporting an L88 style hood scoop.  All the emblems were taken to Unknown Coatings to be powdercoated in black chrome.

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-3

In his decade of ownership, Daniel has made quite a few changes to this retiree.  The Johnson-era suspension is long gone, replaced by more modern equipment.  Up front he installed a set of Hotchkis tubular upper control arms and lowering springs.  To settle the motion of the front end there’s a set of QA-1 twelve way adjustable shocks, and to help keep it planted there’s a PST sway bar.  All the old suspension bushings have replaced with pieces sourced from PST as well.  Hauling this Nimitz-class carrier to a halt are BAER two piston calipers clamping onto 13.5″ rotors.

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-21

The rear has also seen its fair share of upgrades.  It too has BAER brakes, just smaller: single piston calipers on 11.5″ rotors. There are more Hotchkis control arms in the back (upper and lower), but just like the front they’re tubular.  It’s lowered on Hotchkis lowering springs, and stiffened up by a Hotchkis rear sway bar.  The main attraction is the rear end: a Moser twelve bolt piece, with 3.55 gears and Positrac to boot.  Why does this classic need such a beefy rear end?

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-9

Because it has 489 cubic inches of America under the hood!  The 489 (that’s 8 liters to those playing the modern version of the home game) started life as an equally massive 427 cubic inch (7 liter) tall deck big block, but then was bored .030″ over and stroked half an inch to come to the massive displacement it currently sits.  Seeing as how this whole build took ten years, you can be assured he didn’t just drop a big block in the cavernous engine bay and call it a day.  He did things to it.

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-11 Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-13

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-10

Things like put a big Howe Racing aluminum radiator in the nose, which he had covered with cardboard (the radiator, not the nose) because it was so cold on the day we shot.  Sanderson shorty headers mate to a Pypes three inch exhaust, and an MSD 6AL box and plug wires help get the ignition boogying.  Hanging off the front of the motor are some Billet Specialties V-Belt accessories. And then there’s the stuff on top of the massive motor…

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-12

This artsy* photo has the Dart Pro 1 heads and intake manifold in it, along with the Barry Grant Mighty Demon 850 CFM carburetor.  This whole set up provides for a lot of forward propulsion.  Propulsion that the old three on the tree couldn’t handle… Probably.  In place of the three speed is a beefy Tremec TKO 600 five speed gear box, with a floor shifter.

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-15

A Husrt shifter at that!  We’ve seen some cool shift knobs in our history here at CAM, and this one is right up there.  But that’s not the coolest thing about the interior.

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-14

“During the initial build of the car when I started dating my wife I actually told here that the car was more important than her and she ended up sewing the interior for the car.”  She did a killer job.  That is the seat she sewed up in black leatherette with orange inserts, and she did not pull a Marge Simpson and knit some seatbelts.  Daniel grabbed a set of Corbeau four point harnesses.  He also has an Art Morrison four point roll cage in there for that extra little bit of protection.

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-17

The dashboard received the custom touch.  A set of Autometer Cobalt gauges relay important information to Daniel.

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-18

On the day we were shooting he didn’t need to keep cool, but on days he does there’s a Vintage Air air conditioning system to blow conditioned air throughout the cabin.  Below the “I can’t believe that’s not an OEM a/c control panel” sits a Pioneer DEH-800PRS head unit, an upgrade from the old AM radio.  It sends signals and sounds to an MB Quart Q Series amp and mono amp, and 6.5″ component speakers.  There’s also a trio of RE Audio 8″ subwoofers in individual ported boxes.

Old Man Yellow Chevelle 300 Michael Chandler CAMautoMag-4

This car took ten years.  In those ten years Daniel dated a girl who became his wife, graduated college, and moved a couple of times.  During the restoration, which he did in his two car garage, the car took up more space in their house than they did: doors were in the office, drive shaft was in the guest bedroom, etc.  His wife really got to see his passion for cars, and is seeing it again.  He’s building a four door Integra for the LeMons race at Miller Motorsports Park coming up in October.  But that’s not his only Honda project.

S2000 Michael Chandler CAMautoMag

Daniel used to daily drive an Integra LS, which is a fun little car in its own right.  But then it his 210,000 miles, and that’s a lot of miles.  He needed something different, and up popped this AP1 S2000.  He picked it up in November of 2013 and it’s been pretty mild since, only receiving a K&N FIPK intake and JDP carbon fiber duck tail spoiler.  This level of modification shall not last, as he plans install a set of KW Variant 2 coilovers, and more aggressive wheels and tires.

S2000 Michael Chandler CAMautoMag-2

It has taken ten years to transform the Old Man Yellow Chevelle from lightly driven, straight six powered cruiser into a 489 powered boulevard bruiser.  Could he have thrown in a 350 and called it a day years ago?  Definitely, but it wouldn’t be as impressive as it is today.  This Chevelle, and the S2000 down the road, rolls as a testament to taking time to get the ultimate build: one that will stand the test of time, and THAT is the ultimate gratification.

Words and photos by Michael Chandler
*Article and Photos are copyright of CAMautoMag.Com and their respective owners.

*Not terribly artsy, but it’s still pretty cool